By - Jon Herrera

Leaking Central Heating Pipes Detection Utilizing A Thermal Camera

What Can The Thermal Imaging Camera Do?

The camera could be a powerful device for each central heating and plumbing engineers in detecting water leakage from hidden pipes positioned beneath floors.

It helps in locating the pipe routes with out the necessity to remove or dig up any type of flooring, like tiles and hardwood flooring.

The camera removes the necessity for guess work on pipe areas and will in many cases detect where any form of water leakage maybe.

What Type Of Camera Do I Want?

There are various different types of thermal imaging cameras round lately to choose from, but in my experience the cheaper ones needs to be averted for detecting water leakage.

The most effective advise can be to take a look at the middle priced range of camera, it would give better image quality and that image storage, as well locating water leakage below floors.

Central Heating Leak Detection

Extra time a longtime central heating system can and can develop some form of water leakage. This typically happens when the boiler is replaced.

The old boiler worked with a small header tank positioned in the loft so was not beneath a whole lot of pressure.

The new boiler is now pressurised and the header tank no longer needed. The pipe work has solely been tested on low pressure so when converted to high pressure a leak may happen.

These types of leaks might not show up immediately, they can cause damp patches to seem on ceilings and walls, even pressure loss from the central heating system. These leaks if left, can cause damage and must be located and repaired.

This is the place the thermal imaging camera comes in, it might probably locate the water leakage and point you in the best direction to restore the leak.

Does Your Heating System Want A Powerflush?

The central heating system if not handled with an inhibitor will suffer from sludge build up within the boiler, radiators and pipe work.

Sludge is caused by all the completely different metals related to the system, when you add water a conductor, a reaction is started and sludge starts to form.

When you’ve gotten sludge in your central heating system you are throwing cash down the drain. Sludge causes the boiler to work harder to supply the warmth you need.

Sludge puts pressure on all working parts within the heating system and can time beyond regulation cause blockages within the system inflicting a system breakdown.

The thermal imaging camera can decide in case you are suffering from sludge build up within your system and level you in the correct direction as as to whether you need a powerflush or not.

Checking The Powerflush Has Cleaned The System

As soon as the powerflush has been carried out, the thermal imaging camera can be utilized to check that everything is clean. Images may be taken and stored then forwarded on to the customer with a report on the condition of the central heating system.

Benefits Of Utilizing The Thermal Imaging Camera

The thermal imaging camera will discover hidden problems quicker than normal process of lifting floors and searching for the problem.

Determine if the central heating system truly wants a powerflush.

Present proof to the client with images that the powerflush has been accomplished correctly.

Find underfloor heating pipe routes and detect any points that may be present.

The thermal imaging camera has many benefits for the heating and plumbing engineers, to your customers, it makes you look more skilled, and will usher in more work once the word gets around.